As others have said there’s a degree of familiarity about ADLG such that, if you’ve played FOG or any DBx game before, you should immediately recognise many of the concepts used. Needless to say I began to feel comfortable very quickly. I found the 200 point game absorbing with a surprising amount going on very quickly.
I won’t bore you with an after action report but I’d like to highlight something I found hard to grasp: shooting. By the end of the game I had learnt the some of factors involved in shooting but not the underlying process. After the game a little further reading revealed the overall process:
The first thing I’d missed with my initial reading is that the shooting is worked out twice if the target shoots back. This means that you can end up doing the above twice: once as a shooter and once as a target.
During the game I didn’t really get my head around this quickly enough. I was:
- Trying to work out all the modifiers before rolling the dice, as I would with FOG, which wasn’t sensible.
- I kept forgetting to use different modifiers when my target was shooting back.
- Expecting too much from the quality modification for my elite horse archers. In ADLG better quality modification prevents bad scores it does not improve good ones.
The quality adjustment of the raw dice scores is straightforward (see page 12). Here’s the process flow for a shooting element:
So far so good. Next there’s a series of modifiers to apply: one set for the shooter and another for the target. The QRS is commendably brief:
However it isn’t as simple as it looks. When I worked on the process flows there’s quite a bit of complexity. Here’s the shooting resolution but you’ll have to click on the image to read the detail:
In the game this is easy to apply as it’s just a set of cumulative wargames modifiers. Although I’d say the last two in the chain are a little “layered” but not unusually so for wargames rules.
The modification of the target’s protection score is more complex as it is not a set of simple cumulative modifiers :
- Firstly, the list is doing two quite different things. In some cases (with exceptions) it changes the base protection level completely from those on page 20 and the main table in the QRS. In others it applies standard modifiers (with exceptions, of course).
- Secondly, one must remember to add the armour factor for all infantry other than foot knights (see below) when facing certain weapons. Worryingly, this isn’t mentioned on p 48 with the other protection modifiers but is on p 16 instead.
The above diagram is not the first I posted: I spotted an error. Pavises should, and now do, protect against all types of missiles (except artillery). If you want to compare here’s the incorrect original:
As the modifiers are doing two different things the process has many possible outcomes rather than just one: from no change, through a range of adjusted and changed & adjusted protection scores to two completely changed protection values.
On the face of it the overall protection process looks quite simple but I’ve had to cheat by making the “Armour adjustment” a one box, separate sub-process. In full it is:
This means that the protection process is deceptively simple and certainly far more complex than you’d expect on first reading the rules or looking at the QRS. I suppose one could shift the armour test to the beginning but as crossbows, firearms and artillery are unaffected by armour I felt it “cleaner” to put it after these weapon tests.
One point worth repeating is that the armour protection modifier only applies to infantry but not to foot knights. They, and all mounted, have the effects of armour built into their base protection factor (p 20). A little convoluted. I think I can see why they did it but to me it means the armour & troop definitions aren’t internally consistent: some definitions include armour and some don’t.
No wonder I found shooting hard to pick up quickly. Now that I’ve played a game and gone through the rules to write this piece I feel confident relying on just the QRS but I will try to do things in the right (logical?) order.
- Roll the dice first & apply the quality modifiers first.
- Elite modifiers only apply to low dice scores.
- Shooting modifiers are standard modifiers (with exceptions).
- Protection modifiers are more complex.
- Some protection modifiers change the base protection value.
- Other protection modifiers are standard modifiers (with exceptions).
- Remember to add armour protection if the target is infantry.
- In some situations a changed protection value will be further modified.
- If the target shoots back remember you will roll twice & switch modifiers.
I hope this helps someone else.